Learn how to edit materials, adjust camera settings and create a quick and effective lighting setup in Keyshot in under 9 minutes!
We continue to learn Dylan Ekren's approach of how to take a 2D concept design and breake it down to its essential form. Part 2 of 1.
Learn how Dylan Ekren approaches taking a 2D concept design by breaking it down to its essential forms before creating a base mesh in ZBrush. Part 1 of 2.
In this video we will cover a neat way to use the transpose tool to measure relative scale and thicknesses in ZBrush using the transpose tool. This is a handy way to figure out if your 3D prints are within the tolerance of your 3D printer.
In this video we will look at how we used a 'snap in' pin system to cut out parts of the character so that when it is 3D Printed, the character parts will snap together into 1 single piece.
Peter Konig is has produced a short video tutorial that outlines ZBrush techniques he uses when working on stylized character creations.
In this video we will go over some techniques used for removing resin from an old resin tank while preserving the left over resin. We will also cover some useful tools that can be used to help keep everything clean and dirt free!
When prints with SLA 3D Printers, it can save you a lot of material and print time by making the model hollow. However, sometimes you might want to "fill" in the model to give it the weight it should. Check out this video to see our hollow print filling techniques.
Streamed live on Apr 7, 2014
Join the Formlabs' team and world-class artist & sculptor, Robert Vignone of Mold3D, for a webinar on finishing and preparing a completed print for display. Robert will share some of his tips and tricks for making his Form 1 prints really shine -- as well as give us details on an upcoming character design workshop.
This is a tutorial on how to automatically hollow out your model. We will also cover some cleanup techniques to using this automatic method. "Shelling" before printing can greatly reduce the amount of material you need for a 3D print. It also can greatly reduce the amount of stress you put on the printer.